Installation.markdown

+Before delving into the installation, please check [the hardware and software components list](./Requirements) over which we tested **openLEON**.
+
+You will need to install these softwares on each PC:
+
+Installation on the **eNodeB PC**
+
+ - Install UHD
+ - Install srsLTE
+
+Installation on the **Mininet/EPC PC**
+
+ - Install Virtual Machine
+ - Import the virtual image
+
+Installation on the **UE PC**
+
+ - Install UHD/bladeRF
+ - Install srsLTE
+
+If everything is installed, you can go to the [ page of execution instructions](./Instructions for execution) to run the platform.
+
+# **UHD**
+
+Basic dependencies:
+
+```
+ sudo apt-get -y install git swig cmake doxygen build-essential libboost-all-dev libtool libusb-1.0-0 libusb-1.0-0-dev libudev-dev libncurses5-dev libfftw3-bin libfftw3-dev libfftw3-doc libcppunit-1.13-0v5 libcppunit-dev libcppunit-doc ncurses-bin cpufrequtils python-numpy python-numpy-doc python-numpy-dbg python-scipy python-docutils qt4-bin-dbg qt4-default qt4-doc libqt4-dev libqt4-dev-bin python-qt4 python-qt4-dbg python-qt4-dev python-qt4-doc python-qt4-doc libqwt6abi1 libfftw3-bin libfftw3-dev libfftw3-doc ncurses-bin libncurses5 libncurses5-dev libncurses5-dbg libfontconfig1-dev libxrender-dev libpulse-dev swig g++ automake autoconf libtool python-dev libfftw3-dev libcppunit-dev libboost-all-dev libusb-dev libusb-1.0-0-dev fort77 libsdl1.2-dev python-wxgtk3.0 git-core libqt4-dev python-numpy ccache python-opengl libgsl-dev python-cheetah python-mako python-lxml doxygen qt4-default qt4-dev-tools libusb-1.0-0-dev libqwt5-qt4-dev libqwtplot3d-qt4-dev pyqt4-dev-tools python-qwt5-qt4 cmake git-core wget libxi-dev gtk2-engines-pixbuf r-base-dev python-tk liborc-0.4-0 liborc-0.4-dev libasound2-dev python-gtk2 libzmq-dev libzmq1 python-requests python-sphinx libcomedi-dev python-zmq
+```
+
+Install from the binaries files
+
+```
+sudo add-apt-repository ppa:ettusresearch/uhd
+sudo apt-get update
+sudo apt-get install libuhd-dev libuhd003 uhd-host
+```
+
+# **bladeRF**
+
+Install from the binaries files
+
+```
+sudo add-apt-repository ppa:bladerf/bladerf
+sudo apt-get update
+sudo apt-get install bladerf libbladerf-dev bladerf-firmware-fx3 bladerf-fpga-hostedx40 
+```
+
+# **srsLTE**
+
+ - Basic dependencies:
+
+```
+sudo apt-get install build-essential git subversion cmake libboost-system-dev libboost-test-dev libboost-thread-dev libqwt-dev libqt4-dev libfftw3-dev libsctp-dev libconfig-dev libconfig++-dev libmbedtls-dev
+```
+
+ - srsGUI: https://github.com/srsLTE/srsGUI
+ - Volk: https://github.com/gnuradio/volk
+
+Clone and install srsLTE. We tested it using the version 18.3.1, for this reason we encourage you to download this version:
+
+```
+git clone https://github.com/srsLTE/srsLTE.git --branch release_18_03_1 --single-branch
+cd srsLTE
+mkdir build
+cd build
+cmake ../
+make
+make test
+```
+If you have compiled everything and all the tests were successfully passed, you will find all the srsLTE executables in srsLTE/build
+
+In addition, it is needed to copy the eNodeB and UE configurations files:
+
+```
+cd ..
+cp srsenb/enb.conf.example build/srsenb/src/enb.conf
+cp srsenb/rr.conf.example build/srsenb/src/rr.conf
+cp srsenb/sib.conf.example build/srsenb/src/sib.conf
+cp srsenb/drb.conf.example build/srsenb/src/drb.conf
+cp srsue/ue.conf.example build/srsue/src/ue.conf
+```
\ No newline at end of file